An optic cable is made of optical fibers and it’s used in a wide variety of applications like telephone, internet and cable TV. The cables are made of different materials such as plastic, glass or both. The material used depends on the intended us.
How to make the cables. To make the cables you must have the required raw materials. For example, you need to have plastic or glass. You also need to have the cable making machine. To create the Secondary Coating Line you should begin by heating your raw materials (glass or plastic) at ultra high temperatures then draw fibers at extremely high speeds (66 feet per second). When drawing out the fibers you ought to monitor them using mirometer. This is to ensure that the diameter is uniform from the start to end.
For your fibers to send out data over long distances you should ensure that they are highly reflective. You can easily do this by creating a mirror effect inside the fiber. You are doing this by passing the fibers through ultraviolet ovens and coating cups.
When you have your reflective fiber along with you, you need to subject it to a number of tests to make sure that it’s in perfect condition. A few of the tests that you should subject it to incorporate: refractive index profile, tensile strength, bandwidth, fiber geometry, attenuation, temperature dependence, operating temperature, and capability to conduct light underwater.
It’s only after the fibers have passed these tests in the event you package ensemble them in a cable. You can make a cable with one fiber strand or with several strands. Everything depends on the application. To put together the cable you have to surround the fibers with a loose tube of PVC. This is to ensure there exists enough room for that Secondary Coating Line to bend when being routed around corners.
You should then cover the loose PVC with a layer of aramid yarn. The primary function of the layer would be to absorb shock. Finally, you ought to seal out moisture by installing an outer PVC jacket. For your optic cable to send out data you need to connect it to optical transmitter and receiver. The transmitter converts analog and electrical signals into linear modulating light signals. The optical receiver on the other hand accepts the lighting signal and reformats the information to the original form.
To generate good quality and marketable optic cables you ought to have a top quality optic cable machine. We sell an array of Optic fiber cable equipment such as Secondary Coating Line that helps you to make top quality fibers. We have a piece of equipment that will help you to make high quality SZ stranding line
Cleanliness is of great importance to optic fibers. During installing of the fibers, you should pay close attention to cleanliness. According to experts, even minor dirt on the units can prevent them from running efficiently. Due to this, you should make certain that no dirt gets on the fibers. To help keep the units clean you need to regularly clean all of them with specialty kits designed uxenwa the work. For more information about fiber optic fibers like information regarding CWDM networks you need to highly consider visiting us. We also have plenty of information about DWDM networks. Visit the given links to know more.