If you are investing in a stair with balusters in a contrasting material, including painted balusters on an oak stair, questions will more than likely arise with regards to the finishing of the stair. “Should my painter finish the balusters separately from the stair, then have the balusters fitted when the stair is completed?
Here are a few points to consider with Railing Installers Hamptons: Your painter will usually choose painting the balusters before installation. This allows them to be sprayed instead of brushed and eliminates a lot of “cut-in” work.
Painting balusters separately does mean the stair installers will have to revisit the web page, eliminate the railings and install the balusters. You will see charge for this particular “second trip” towards the jobsite. You will need to be sure you schedule this “second trip” in coordination using the finishing of the conclusion.
Leaving your balusters out for painting means that they are more likely to be lost or stolen during this time period. You may be responsible for balusters left in the jobsite. After the painted balusters are finally installed, you will have additional “touch-up finishing required on the rail joints. Holes will need to be filled and stain and complete re-applied for the final finish.
Plan installation of your hardwood stair for after your drywall continues to be taped, sanded, and primed. The drywall process can cause damage to the stair. Drywall mud and paint overspray could make the stair finishing process very hard and may also make desired results impossible to attain.
Most hardwoods are an open grain wood and when dirt gets a part of open grain it is extremely difficult to remove, even with sanding. This will have a negative effect on the appearance and texture from the finish. Care must also be used to guard the stair from dirt and mud.
Never Cover Hardwood Stairs With Plastic. Plastic will not allow airflow, trapping moisture underneath and resulting in the wood to expand and contract. This expansion and contraction causes the wood joints to open up up and may cause the wood to crack.
The environmental conditions indoors are important to the standard of the stair. Hardwood lumber has been dried via a very controlled process to an industry standard moisture content of 6 – 8%. This matches the moisture content vcbxbf the normal home and allows the wood to keep stable under normal conditions.
In cold climates, whenever a house is heated to some high temperature during winter, the air may become very dry, creating the wood to shrink. This shrinkage will make cracks visible inside the wood and joints may begin to start up. Subjecting a stair to high amounts of heat is similar to putting it inside an oven and can accelerate the deterioration of the stair.
All hardwoods should be sealed on every side to retard movement and protect from being exposed to elements and damage. It is strongly recommended to seal wood immediately.